Some links in this guide are affiliate or referral links. No Bars Club may earn a commission from qualifying purchases at no additional cost to you. Read the full disclosure.
Parts list
| Part | Link |
|---|---|
| RAK4631 WisBlock starter kit nRF52-based starter option | View part ↗ |
| WisMesh RAK3312 starter kit Alternate starter option | View part ↗ |
| RAKwireless PoE Injector PID 910071 PoE source | View part ↗ |
| 25 ft outdoor shielded Cat7 cable Outdoor PoE cable example | View part ↗ |
| ALFA Pi4-PoE 5 V 3 A USB-C splitter Power-only splitter option | View part ↗ |
| RAKwireless 5 V USB-C PoE splitter Power-only splitter option | View part ↗ |
| RAK13800 WisBlock Ethernet Module Ethernet module for power/data path | View part ↗ |
| RAK19018 / Silvertel Ag9905MT PoE module PoE module used with RAK13800 | View part ↗ |
| RAK12501 L76K GNSS module Optional GNSS module | View part ↗ |
Build process
- Choose the radio platform
Start with the RAK4631 or RAK3312 option that matches your firmware/features and enclosure plan.
- Choose the PoE approach
For power only, use a compatible 5 V USB-C splitter. For Ethernet functionality plus power, use the supported RAK Ethernet/PoE module combination.
- Bench-test the injector and splitter
Confirm the PoE injector, cable and splitter/module negotiate and produce the expected voltage before attaching the radio.
- Build the enclosure
Use outdoor-rated Ethernet entry hardware, strain relief and appropriate grounding/surge practices for exposed cable runs.
- Configure the node
Flash current firmware and configure the regional radio settings and node role. Add the GNSS module only if your build actually needs it.
- Deploy and monitor
Place the node and antenna for coverage while keeping the Ethernet run serviceable. Recheck power and enclosure temperature after sustained operation.
Build notes
- The Rokland referral parameter ref=yskzwcgr is preserved on the linked products.
- Outdoor Ethernet that exits a building should be installed with appropriate surge/lightning protection practices.
- A PoE build is ideal where reliable wired power is available and solar is unnecessary.
This guide was adapted from No Bars Club's working build notes. Product availability, pricing and firmware can change, so verify compatibility before ordering or powering hardware.
Open Notion source ↗